Posted by OurVolvo.com on Jul 20, 2012 in
1999 Volvo V70 
A very special thanks goes to my friend Rob at http://www.volvotips.com/ who helped with priceless advice every step of the way.
BRIEF: While you may enjoy reading the full story of my searches for repair/replacement of my 1999 Volvo V70 Ignition Switch and/or Key Lock Cylinder Problem with Key Rotating Freely at 360 Degrees, it is more probable that you want to fix your car first.
The foremost and cheaper thing to do is check the electric part called the Ignition Switch. The ignition switch is attached with two screws on the LEFT side of the ignition assembly costs about $60 from either the store or the dealer (dealer probably will only bit around $10 more expensive but it will be a genuine part) and is recommended for replacement every 100,000 miles.
IMPORTANT: You can still start the car even if the switch or the ignition cylinder or something in the brackets is broken. Unscrew the ignition switch and with a key in the ignition, in POSITION II, insert a flat head screwdriver as shown on the picture below. Twist the screwdriver and the car will start.
The ignition switch comes in at least two versions in the newer models and with our luck came with both version in the 1999 V70 which could be determined by taking it OFF (not apart if you don’t want to break it) or by calling Volvo with your VIN number. The part is also available by BWD via Advanced Auto Parts and/or Autozone, if you don’t want to wait on the dealer. The part is NOT yet in their online catalogue, but it is found in the printed master catalog. 1999 Volvo with chassis starting from CH587537 take Part. No CS1054, while chassis up to CH587537 take Part. No CS1057.
I honestly to this day do not know which one goes on the Volvo with chassis No CH587537 and I do hope that as you are reading this you are realizing this is the chassis number of your Volvo. Anyhow, take the switch out and it will be obvious which one you need.
Finally, don’t try to fix this part, as there is not much to fix as you can see on the picture below. Just get a new one and replace it. I tried to fix mine when it was not broken and promptly broke it as a result. Volvo has done a really Mickey Mouse job on this one.
If you are seeing this part of your switch in photo below, you have done what you are NOT supposed to and opened the switch. It is very hard to get everything aligned back and re-shut. But of course curiosity kills the cat – but this is a $75.33 learning experience. Basically think, if you followed the previous directions and started the car with using a screwdriver, this part works fine.
Tags: 1999, 360, 850, degrees, DIY, freely, ignition, Key, part, rotating, S80, switch, v70, Volvo, with
Posted by OurVolvo.com on Jul 15, 2012 in
1999 Volvo V70 A very special thanks goes to my friend Rob at http://www.volvotips.com/ who helped with priceless advice every step of the way.
BRIEF: While you may enjoy reading the full story of my searches for repair/replacement of my 1999 Volvo V70 Ignition Switch and/or Key Lock Cylinder Problem with Key Rotating Freely at 360 Degrees, it is more probable that you want to fix your car first. So, first things first in two easy and simple steps:
(1) Make sure the problem is NOT in the electric part called the ignition switch, which is attached with two screws on the LEFT side of the ignition assembly or steering wheel. See how here: 1999 Volvo V70 IGNITON SWITCH (Cost: around $60-$75).
(2) If it is NOT the ignition switch, you will need to order the whole ignition assembly, which comes with the “coded” key ignition cylinder inserted into the bracket which attaches around the shaft behind your steering wheel. Don’t waste more time, find your VIN number and call to order Volvo part # 8626325 for $225 (+10S&H + Tax) from:
Don Snyder at Darrell Waltrip Volvo Subaru
615-599-6294 (direct) or
1-800-679-6124 (toll free) or
Don.Snyder@HendrickAuto.com
We ordered our part on Tuesday afternoon and received it promptly on Friday morning via FedEx.
Don’t forget to mention ourVolvo.com INTERNET SPECIAL. Now here’s the long story:
Recently, my ignition key on 1999 Volvo V70 started messing up. As the problem persisted for a week or so, the key began freely rotation at 360 degrees without ever catching and starting the car. With such symptoms you can have one or all of the following problems:
(1) Ignition switch, the electric part located on the left of your steering wheal has gone bad. See how to replace it yourself for around $60 or redneck-fix-it here.
(2) Ignition key lock (where your key goes in). This part is precut only by Volvo in Europe by your VIN number. See costs and repairs here:
(3) The metal guillotine, which locks your steering wheel or some other metal part within the ignition assembly, has broken. There’s no way for you to take it apart and fix it. There’s no way for you to take the ignition cylinder out of the assembly. There’s no way to order them separately. They have to be ordered together from Volvo and mounted as described here.
In some rare cases, you may be lucky and have all of the above. Anyway, if you have to change the ignition assembly, it’s recommended to change the ignition switch as well. Especially the older ones with the pin prongs sticking out get oxidized and just cleaning them is not always dependable.
Several tips to remember before you begin:
- If you don’t want to waste your time, just drill the two holding bolts out from the top. The top part of the bracket has no treads.
- It may be difficult to take the top part of the holding bracket without breaking the tiny clear plastic years of the air bag assembly. You can use your old top bracket as it is.
- When you try to put the cover back together, cut your wheal 90 degrees to the left and then the bottom cover will slide in place very easy.
- The wholes for the ignition switch have no treads. Just tighten the screws in and they will snug real good with the soft metal inside the wholes.
- And finally, if it ain’t broken don’t try to fix it!
Now, see how to fix (DIY) the Ignition Switch and replaced the Ignition Key Cylinder and Assembly on our 1999 Volvo V70? Use one of these helpful tutorials depending on your Volvo model. We’ve made copies of them on our website in case they get lost in the forums:
Also a much necessary price quotes and dealer / part store review:
Volvo of Chattanooga
$99 initial diagnostics (if you can get your car towed to them)
$301 ignition cylinder
$1100 ignition column
Volvo of Knoxville (800) 346-8762
$200 ignition cylinder plus $356 labor
Nalley’s Volvo in Atlanta (800) 671-3174 had surprisingly reasonable prices and a very, very helpful part/service adviser, which no other Volvo dealership seemed to offer.
Dayer Volvo of Atlanta (888) 593-3772 gave a quote on parts and repair in the range of $700-900. When I asked for a bit more specific number I was told $840. Seriously? Guess when I’ll go there for a repair – like NEVER. Thumbs down plus BEWARE!
Taska Parts was also recommended on some forums as a cheaper alternative. They order from Volvo and quoted me $230 for the ignition cylinder but after calling and asking 3 times I was still not clear if I am getting just the key cylinder or the whole assembly.
Tags: 1999, 360, cylinder, Darrell Waltrip, degrees, DIY, Don Snyder, freely, ignition, Key, lock, part, problem, rotating, switch, v70, Volvo
